1. Use AVDI to program key for CAS 3++

Normally we get these and then remove and backup on the bench before downgrading and programming a key through OBD with AVDI with 13.5v charger etc.

 

Cons: obviously don’t like downgrading as potential issues and also removes the security aspect in the car.

 

2. Use CGDI BMW Programmer to program key for CAS3++

It is possible to bypass the downgrade by reading the flash and EEPROM on the bench and then loading it into tango and programming key through that.

 

It's how I used to do 9389115 before it was doable by OBD. I used CGDI BMW not Tango to write the key, though. Once downgraded, you can always reflash in a couple of minutes.

 

3. Use Tango to program key for CAS3++

If we talking about spare key then, of course, read EEPROM on the bench is enough (working key required to decrypt ISN). If all keys lost still need downgrade or need cas eeprom + ISN from DME

Tango always prompt to write new EEPROM to CAS after key programming but you don't have to do it, unless you program new key on already used position.

Question:

I tried this today with a working key and it doesn't work. Old key works fine, but the new one just doesn't bring the dash on? In the end, I downgraded CAS & then programmed through OBD and worked fine (obviously having a backup first.

I've tried it on 3 cars though so don't think it's my files, cause I always verify the read with VVDI prog & Tango detects it as a cas3++. It must be my keys.

Answer: I do duplicates the same way, but I use the Xhorse VVDI2 programmer.

 

4. Program key for CAS3++ without downgrading:

You can read EEPROM on cas3+ or cas3/ista-p, then use a programmer to make key with EEPROM file. that's how I do keys when I don't downgrade. I don't write back to CAS, I choose new key position.

Thanks.

 

http://blog.obdexpress.co.uk/2019/11/20/how-to-program-key-for-cas-via-obd/

Humzor NexzDAS Pro can work with Ford & USA Ford to perform professional diagnostic job.

 

Ford V19.1.pdf:

https://mega.nz/#!RERw3Soa!VDYlBRWO1C2GoLBpNieeWTLvoggVahwpwFNqyhJc7tk

 

USA Ford

https://mega.nz/#!5RZSAaQT!r82TAGdAZeUwTa5p88WKYzHCNTp-Arm5JNS97Y2wfFE

Year: 1996 - 2018

Read codes: √

Erase codes: √

Live data: √

Active test: √ (It may vary by models, types, years, thus only the available ones will be shown.)

 

Humzor NexzDAS Pro language: 

English, Italian, German, Russian, French, Spanish, Polish, Traditional Chinese etc.

 

Humzor NexzDAS Pro update:

Free update on the official site: www.humzor.com .

 

Look at this Humzor NexzDAS Pro (SC393-B):

[caption id="attachment_23608" align="alignnone" width="500"] Humzor NexzDAS Pro[/caption]

Run with one Android phone (IOS phone is not okay yet).

From: http://www.obdexpress.co.uk/wholesale/humzor-nexzdas-pro-full-system-scanner.html

Price: 147eur

 

And this Humzor NexzDAS Pro with 10" tablet

Packed with one 10" tablet, meanwhile you can download the software (from the official site)  into the Android phone, so that you can use with both tablet and phone.

Source: http://www.obdexpress.co.uk/wholesale/humzor-nexzdas-pro-obd2-scanner.html

Price: 221eur

 

Quick "How-to" guide on using Humzor NexzDAS Pro:

Step 1:The NexzDAS APP has already installed, so just open it directly with network working.

Step 2:Use an email to register firstly and set up your login password.

Step 3:Binding the product, get the serial number and activation code from the password envelope.

Step 4:Plug the device into the car's OBD port, turn the ignition with engine off

Step 5:Open the App, Bluetooth will automatically connect with its icon turn into blue.

Step 6:Click the "App Store" and choose to download the models and functions you need. Then start to enjoy the smart diagnosis.

 

That's all.

 

Thanks

 

Source:http://blog.obdexpress.co.uk/2019/11/18/humzor-nexzdas-pro-ford-scanner-function-list/

Offer free GDS2 21.0.01501 + Tech2Win16.02.24, NO VMware, No computer requirement, No need activation.
GDS2 21.0.01501:

https://mega.nz/#F!jN4lSYaA!5Q_p4sZEySxLu6HVPP418A

GDS2 language: multi-lingual

 

Tech2Win16.02.24: https://mega.nz/#!tIFWUIxT!XBAFZWEFPhQ3A9MtyPYfT1wojVgB1sEmt2T62nrmQcM

Tech2Win Language: English

 

It is Free , but must be connected VCX Device (wifi & usb options)

For Saab, Opel /Vauxhall, GM Global, GM China

Step:
1, Download InstallPackage
2, Run "GDS2AutoInstall.exe" to Install Gds2
3, Install VCX Manager and GM driver.
4, Run Gds2.exe(shortcut on desktop)

 

Here is one video guide:

 

 

Feedback:

The VM does not expire because it is frozen in time. I used these files to update a VM with no issues.

 

That file is emulating activation only if you are using a VCX tool
Otherwise your GDS2 will not be activate it.
As you can see you have to have the VCX tool connected before start the emulator
But if you have an already updated VMware don't need to use that GDS2.exe

 

Will GDS2 Software 2019/4 work with the MDI head?

Answer: Of course it goods works but you need to activate it and lease it.

Also it doesn't have all regional language it only have English German and etc. not have all language in database.

 

Thanks

Sourece:http://blog.obdexpress.co.uk/2019/11/11/free-download-gm-gds2-21-0-01501-tech2win16-02-24/

The author searched the forums and sites looking for free source of XENTRY 12/2019 XDOS 19.12.5. Finally, hard work pays off.

Free source 1: XENTRY 12/2019 Torrent
https://mega.nz/#!cQYjRAob!c4C9T-38Y_i6rnCM8-4nehbL9L2demSrsMbnbLiP4M8
No password
Not tested widely.

Free source 2: XENTRY Diagnostics OpenShell & PassThrue & Kit & VCI Patcher Premium Edition 5.7

The contributor is @ Glintweb (member of cartechnology.co.uk)
He offers paid Patcher 5.7 and his support, aiming to help the user to install Full XENTRY Diagnostics from Version 2015 to Last version (12/2019)
Tested working source of XENTRY 09/2019:
SSD version: 09/2019 Xentry DAS Software 256G
incl. HHT-WIN, Latest V8.14 DTS Monaco ＆ Vediamo

HDD version: 09/2019 Xentry DAS Software 256G
With V8.14 DTS Monaco, HHT-WIN ＆ Vediamo

Both are compatible with the best Benz diagnostic tools: MB SD C4 Plus & Benz ecom.

What is MB SD C4 Plus?
It is the best sdconnect C4 2019.
Look at this image which conclude all its unique features also its internal board:


No tested working XENTRY 12/2019?
No, obdexpress.co.uk is testing, soon it will be okay and available.
Please wait several days.

Here attach 4 images of XENTRY 12/2019 software:



Thanks.


Source:http://blog.obdexpress.co.uk/2019/11/09/free-download-xentry-openshell-xdos-2019-12/

The author searched the forums and sites looking for free source of XENTRY 12/2019 XDOS 19.12.5. Finally, hard work pays off.

 

Free source 1: XENTRY 12/2019 Torrent

https://mega.nz/#!cQYjRAob!c4C9T-38Y_i6rnCM8-4nehbL9L2demSrsMbnbLiP4M8

No password

Not tested widely.

 

Free source 2: XENTRY Diagnostics OpenShell & PassThrue & Kit & VCI Patcher Premium Edition 5.7

 

The contributor is @ Glintweb (member of cartechnology.co.uk)

He offers paid Patcher 5.7 and his support, aiming to help the user to install Full XENTRY Diagnostics from Version 2015 to Last version (12/2019)

Tested working source of XENTRY 09/2019:

SSD version: 09/2019 Xentry DAS Software 256G

incl. HHT-WIN, Latest V8.14 DTS Monaco ＆ Vediamo

 

HDD version: 09/2019 Xentry DAS Software 256G

With V8.14 DTS Monaco, HHT-WIN ＆ Vediamo

 

Both are compatible with the best Benz diagnostic tools: MB SD C4 Plus & Benz ecom.

 

What is MB SD C4 Plus?

It is the best sdconnect C4 2019.

Look at this image which conclude all its unique features also its internal board:

 

No tested working XENTRY 12/2019?

No, obdexpress.co.uk is testing, soon it will be okay and available.

Please wait several days.

 

Here attach 4 images of XENTRY 12/2019 software:

 

 

Thanks.

 

 

Source:http://blog.obdexpress.co.uk/2019/11/09/free-download-xentry-openshell-xdos-2019-12/